0086-311-87162903 / 0086-311-83802338
0086-311-83809529
No.368,Xinshi North Road,Shijiazhuang City,China
CONTÁCTENOS
Copyright © Shijiazhuang Naipu Pump Co.,Ltd All Rights Reserved. 冀ICP备12002486号-1 Powered by www.300.cn
Impeller
 |
 |
 |
| Cover plate liner | Frame plate liner insert | Frame plate liner insert |
 |
 |
 |
| Frame plate liner | Impeller | Throat bush |
The rubber parts are wear resistant and corrosion resistant, usually used for acid working conditions, such as tailing in mining industry, slurry with small particles and no rough edges. The whole displacement part includes Cover Plate Liner, Throat bush, Frame plate liner, Frame Plate Liner Insert. The rubber spare parts material is natural rubber, synthetic rubber, EPDM Rubber, Nitrile Rubber, Fluororubber or any other as requests, which guarantees excellent performance including wear resistance, chemical resistance , waterproof and higher operating temperature range from -40-75℃.
The Rubber impeller dimension is same with High Chrome Alloy Impeller. We also could provide Rubber Slurry Pump with Metal Impeller. Impeller is the most important spare parts of a Centrifugal Slurry Pump. Centrifugal pumps need impeller to produce the centrifugal force which processing the slurries. The centrifugal force is generated by the impeller when it runs to a certain speed.
Rubber Pump Liners: Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
Rubber Seals (O Ring)
An slurry pump O-Ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus, it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
Intake Gasket
Slurry pump intake gasket is used to seal the pump and pipeline or valve connected to the pump suction end.
Discharge Gasket
Slurry Pump discharge gasket is used to seal the pump and pipeline or valve connected to the pump discharge end.
End Cover Seal
Slurry Pump End Cover Seal , also named shim set (gasket),used to adjust the gaps in bearing assembly.
Main Rubber Material Introduction:
• NR08 is a black natural rubber, of low to medium hardness. NR08 is used for impellers where superior erosive resistance is required in fine particle slurries.
• NR26 is a black, soft natural rubber. NR26 is used for lines where superior erosion resistance to all other materials in fine particle slurry applications.
• NR33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.
• NR55 is premium grade black natural rubber, it is suitable for severe erosive fine particle slurries.
|
Material Code |
Material Name |
Applications |
|
NR08 |
Natural Rubber |
Impeller, Liners, Expeller Ring, Expeller, etc. |
|
NR26 |
Natural Rubber |
Impeller, Liners, Expeller Ring, Expeller, etc. |
|
NR33 |
Natural Rubber |
Impeller, Liners, Expeller Ring, Expeller, etc. |
|
NR38 |
Natural Rubber |
Mainly used in Impeller |
|
NR55 |
Natural Rubber |
Impeller, Liners, Expeller Ring, Expeller, etc. |
|
NS01 |
EPDM Rubber |
Seals, etc. |
|
NS10 |
Nitrile Rubber |
Seals, etc. |
|
NS12 |
Nitrile butadiene rubber |
Impeller,Liners etc. |
|
NS21 |
Butyl Rubber |
Impeller,Liners etc. |
|
NS42 |
Neoprene |
Impeller,Liners etc. |
|
NS31 |
Hypalon |
Impeller, Liners, Expeller Ring, Expeller, etc. |
|
NS44 |
Neoprene |
Seals |
|
NS50 |
Fluorous Rubber |
Impeller,Liners, Seals etc. |
|
NP50 |
Polyphenylene Sulphide |
Lantern Ring, Lantern Restrictor |
PRODUCTOS
PRODUCTOS
CONTACTO
Tel: 0086-311-87162903
0086-311-83802338
E-mail: info@naipump.com
Fax: 0086-311-83809529
Add: No.368, Xinshi North Road, Shijiazhuang City, China